KÜTTEKAABEL DEVIflex 10T 20W 230V 2m

DEVIflex™ is a two-conductor heating cable with one connecting cable. Heating area 0.2 m². Application for floor/heating renovation floors: - Concrete floor thickness is less than 5 cm - Suitable for screed and panel construction floors. Also suitable for freeze protection and pipe tracing heating. DEVIflex™ heating cable is suitable for use in both new construction and renovation projects: heating of concrete, wood and panel structures (gypsum board and particleboard) as well as screed floors in homes, offices, public spaces, factories, schools, etc., with tile, plastic, cork, laminate or wood flooring. The heating cable is supplied pre-measured on a single-use reel, facilitating installation. The cable is marked with meter indicators. DEVIflex™ 10T heating cable has a power output of 10 W/m. Installation spacing can vary between 17-6 cm, resulting in a power density of 60-150 W/m². In concrete floors, the typical power density used is 100-120 W/m². In gypsum board floors, the power density used is 80-100 W/m² (max. 100 W/m²). In screed construction floors, the power density used is 60-80 W/m² (max. 80 W/m²). The heating cable can also be used for pipe tracing. The cable is attached to the pipe with aluminum tape at intervals of 25-30 cm, either single or double, depending on the required power. Technical specifications: Operating voltage: 230 V Power per meter: 10 W/m Diameter: 6.9 mm Cable construction: round, shielded, two-conductor, one connecting cable Connecting cable: 2.3 m, DTCL, 3 x 1.5 mm² or 3 x 2.5 mm² Outer sheath: PVC Maximum ambient temperature: 65 °C Minimum installation temperature: -5 °C Minimum bending radius: 6 x cable diameter Conductor insulation: PEX Standards: SEMKO, CE, IEC60800:2009 This product description is an automated translation of the original Finnish description.