ANDMESIDEKAPP SEINALE 19" 16U 785x600x600mm HALL

Dynamic series wall-mounted network cabinets are designed for easy and cost-effective network expansion. Each cabinet’s ceiling, floor, and rear wall are equipped with pre-cut cable entry openings. The ceiling structure also features a pre-cut area for installing the fan module. Inside, two pairs of zinc-coated 483 mm (19-inch) rack rails are installed, marked with height units readable from both directions. Their depth is adjustable. Each cabinet is manufactured from 1.5 mm thick steel sheet.

Powder-coated in standard colors: gray (RAL 7035) or black (RAL 9005). Removable side panels and a lockable, removable front door enhance aesthetics. Door hinges can be reversed. Wall mounting is performed in two simple steps: the provided mounting plate is bolted to the wall and then attached to the cabinet.

Technical specifications:

• Enclosure rating: IP20
• Lockable safety glass door with steel frame
• 235° door opening angle
• 1-point locking mechanism on front door
• 483 mm (19-inch) rack rails with adjustable depth and height unit markings
• 483 mm (19-inch) zinc-coated rack rails installed on both front and rear of the rack
• 0.8 - 1.2 mm thick steel sheet with high load capacity, powder-coated
• Ceiling prepared for ventilation units (perforated inlet openings)
• Ventilation openings for active and passive air exchange and exhaust
• 4 grounding points (base, side panel, and front door) with protective caps
• Equipment mounting depth min.-max.: 320 - 450 mm
• Cabinet type: Wall-mounted cabinet
• Color: Light gray, RAL 7035
• Depth: 600 mm
• Front door: Glass door, single opening
• Load capacity: 60 kg
• Side panels: Both sides
• Height: 16U
• Width: 600 mm
• IP protection rating: IP20
• Pre-assembled: Yes

This product description is an automated translation of the original Finnish description.