HARUKARP KLEMMIGA T 250 KL 240x190x95mm IP66

• Connectors mounted on pre-installed mounting rails are lifted upward and positioned along the enclosure edges for easy cable passage and connection. Free internal dimensions: 225 x 173 x 86 mm. • Easy lid opening with quarter-turn latches that can also be sealed. • The lid can remain hanging on a safety cord during installation. • Inspections and measurements are easier to perform when connection points are clearly visible. • Tight, soft, and removable cable entry seals (EVA; ethylene vinyl acetate) installed on each side, along with entry grommets on the base and an accessible condensate drain opening on each side. • Instead of removable cable entry seals, mounting pipes or cable glands can be installed. • The plastic enclosure is UV-protected, with an IP66 sealing class and mechanical protection IK06 according to EN50102. • The supporting enclosure body is made of halogen-free polypropylene and contains no fluorides, chlorides, or bromides. • Alignment marks on the bottom edge of the enclosure on each side facilitate installation at the target location. • Additional pre-installed mounting points/holes are provided in the base stiffeners for other required base plates or devices. This product description is an automated translation of the original Finnish description.